Skip to main content

Home › Ironworkers › West Palm Beach

Workers' Comp for Ironworkers in West Palm Beach, FL

For steel erection crews setting joists, deck, and structural frames on Palm Beach County warehouses, towers, and institutional projects.

From the licensed team at Cheap Workers Comp Florida (FL agency license #L077476) • Updated November 2026

Structural steel is a smaller trade in Palm Beach County than block and concrete, which means the ironworking companies based here tend to travel across the whole county and often into Broward and the Treasure Coast. The work runs from roof joists and metal deck on tilt-wall warehouses along the Turnpike and Southern Boulevard, to steel framing inside downtown West Palm Beach projects, to stairs, canopies, and equipment supports at hospitals and schools.

Two codes matter most. Code 5059 applies to iron or steel erection on frame structures not over two stories, and code 5040 covers erection on taller frame structures. Both are high-rated classes, and both carry the same filed rate across Florida. For a West Palm Beach erector, the questions that decide premium are how payroll splits between the two codes and how well the company keeps falls and struck-by injuries off its record.

Class codeDescription2026 FL filed rate
5040 Iron or Steel Erection: Frame Structures $7.16 per $100 of payroll
5059 Iron or Steel Erection - 2 Stories & Under $10.40 per $100 of payroll

Florida rates are set statewide, so a West Palm Beach business pays the same filed rate as one anywhere else in the state. Your actual cost depends on payroll, your experience mod, and how the work is classified.

Warehouses, logistics space, and the low-rise code

Industrial construction in the county has pushed west and south. A large logistics center has been approved in the Agricultural Reserve west of Delray Beach, and distribution and flex buildings keep going up near the Turnpike interchanges and around Palm Beach International Airport. Most of these buildings are single-story with high clear heights, so the joist and deck work usually lands in 5059.

Do not assume single-story always means a small exposure. Connectors on a 36-foot warehouse roof are working at height, often on open joists, and that is where serious claims come from. A carrier underwriting a 5059 account will still want to see a written fall protection plan and evidence that it is followed.

Taller work, cranes, and South Florida weather

Taller projects in downtown West Palm Beach, Boca Raton, and the hospital campuses bring 5040 into play. Here, crane picks, wind, and the summer pattern of afternoon thunderstorms with lightning are constant scheduling factors. Crews that push to finish a pick as a storm cell builds over the Everglades are taking on exactly the kind of risk that turns into a lost-time claim.

Work near the Port of Palm Beach in Riviera Beach and on marine structures adds salt exposure, uneven surfaces, and tight coordination with other trades. If your company does a mix of building erection and marine or industrial steel, describe that mix fully so the work is classified correctly from the start.

  • Frame structures not over two stories: typically 5059
  • Frame structures over two stories: typically 5040
  • Keep daily job logs by project so the split survives audit

Certificates, subcontracted connectors, and compliance

General contractors running steel packages in Palm Beach County almost always require certificates, often with waiver of subrogation, before an erector mobilizes. If you bring in a connector crew or a welding sub that lacks its own policy or DFS exemption, Florida law lets that payroll come back to your policy, and a DFS stop-work order can halt the whole package while the penalty, generally twice the premium owed for up to two years, is resolved.

Steel erection is construction work, so even a one-employee shop needs coverage. A corporate officer with at least 10% ownership can apply for an exemption, but an exempt officer who falls off a joist collects nothing from workers' comp, which is a hard choice in this trade.

Example: what the base premium looks like

A ten-person steel erection company in Riviera Beach setting joists, deck, and frame steel on single-story warehouses near the Turnpike and the airport.

Annual payroll
$620,000
Code 5059 rate
$10.40/$100
Base premium
$64,480/yr

Keeping taller jobs documented separately prevents an auditor from moving low-rise payroll into 5040. With a high-rated code and large payroll, even one fall claim can move the mod noticeably, so safety records pay for themselves at renewal.

Base premium = payroll ÷ 100 × filed rate, before your experience mod, SUTA, and program fees. Figures are illustrative, not a quote.

Questions from West Palm Beach ironwork companies

The code is based on the number of stories, not wall height, so a single-story warehouse is generally 5059. Confirm the classification for any mezzanine or multistory office section attached to the building.

Usually not. Shop fabrication is typically classified separately from field erection. Track shop and field hours so each is reported under the correct code.

The filed rates are the same statewide. Location does not change them. Premium differences come from payroll, experience mod, code mix, and carrier or PEO pricing.

Sometimes. Some PEO programs will look at steel erectors with higher mods if the safety program is solid. Approval is not guaranteed and depends on loss history.

Other trades in West Palm Beach

Ironworkers in other Florida markets

Related guides

Get Your West Palm Beach Ironworkers Quote

See your 2026 rate and estimated premium in about a minute.

Calculate My Quote →

Free • No obligation • Instant results

Renewal coming up?

Upload your current policy

Pay-as-you-go, billed each payroll

No large down payment

Higher experience mods considered

FL License #L077476

Get Your West Palm Beach Ironworkers Quote

2026 Florida filed rates for structural iron work, priced in about a minute. Pay-as-you-go, no big deposit.

Get My Free Quote315-COMP